Laundry Waterproofing Guide is essential reading for anyone planning a bathroom renovation or new build in Perth. Bathroom waterproofing is one of the most critical building processes in any home, yet it remains one of the most frequently defective. In Perth, where sandy soils and high water tables can compound moisture problems, getting bathroom waterproofing right the first time is not optional — it is essential for protecting your property and your health.
Laundry Waterproofing Requirements
Laundries are classified as wet areas under AS 3740 and require waterproofing to the same standard as bathrooms. The entire laundry floor must be waterproofed, with the membrane extending at least 150mm up all walls. This includes areas behind and beside washing machines, under laundry tubs, and around all plumbing penetrations.
Many Perth homeowners are surprised to learn that laundry waterproofing is mandatory, particularly in renovation projects where the existing laundry may never have been waterproofed. During a renovation, if the floor covering is being replaced or the substrate is being modified, waterproofing must be brought up to current AS 3740 standards. For more information, see our laundry waterproofing services. This is a legal requirement in Western Australia, not merely a recommendation.
Common laundry waterproofing failures include leaks around washing machine connections, overflow from blocked drains or malfunctioning machines, and condensation from dryers. A properly waterproofed laundry floor with adequate fall to a floor waste protects against all of these scenarios and prevents water damage to adjacent rooms and the building structure below.
AS 3740 Requirements for Wet Areas
AS 3740-2021 is the Australian Standard that governs waterproofing of domestic wet areas. It specifies which areas must be waterproofed, the minimum membrane extent, and the performance requirements that waterproofing systems must meet. In Western Australia, compliance with AS 3740 is mandatory under the National Construction Code and enforced by the WA Building Commission.
Under AS 3740, the entire floor of a shower recess must be waterproofed, with the membrane extending at least 1800mm up all shower walls from the finished floor level. Bathroom floors outside the shower must be waterproofed in their entirety, with the membrane turning up at least 150mm at all walls and junctions. For more information, see our AS 3740 compliance guide. These are minimum requirements — many experienced Perth waterproofers recommend exceeding them for additional protection.
The standard also requires waterproofing around all penetrations, at all internal corners, and at the junction between horizontal and vertical surfaces. Bond-breaker strips must be installed at all internal angles to accommodate building movement. These detailing requirements are where most waterproofing failures occur, making them the most critical aspect of any bathroom waterproofing installation.
Shower Waterproofing: The Most Common Failure Point
Showers are the highest-risk area for waterproofing failure in any bathroom. The combination of constant water exposure, steam, thermal cycling, and building movement creates demanding conditions that test the waterproofing membrane daily. In Perth, where hot showers create significant temperature differentials between the wet area and surrounding structure, thermal stress on membranes is particularly high.
The key to reliable shower waterproofing is ensuring complete membrane coverage of the shower floor and walls to the full required height, with proper detailing at all corners, junctions, and penetrations. The shower hob, which is the raised threshold at the shower entry, must be waterproofed as an integral part of the shower membrane to prevent water from escaping under the hob and into the adjacent bathroom floor structure. Learn more through our wet area waterproofing requirements guide.
Flood testing is the final verification step for shower waterproofing. After the membrane has fully cured, the shower recess is filled with water to a depth of at least 25mm and held for 24 hours. Any loss of water level indicates a membrane failure that must be identified and repaired before tiling begins.
Choosing the Right Membrane for Your Bathroom
For Perth bathrooms, liquid-applied acrylic or polyurethane membranes are the most commonly used products. They offer excellent adhesion to concrete and fibre cement substrates, flexibility to accommodate minor building movement, and compatibility with standard tile adhesives. Major Australian brands including Ardex, Davco, Gripset, and Fosroc all offer products suitable for Perth conditions.
When selecting a membrane product, consider the substrate type, the areas to be waterproofed, and the specific conditions of your Perth bathroom. For timber-framed bathrooms, a more flexible membrane is required to accommodate greater movement. For more information, see our bathroom waterproofing guide guide. For concrete slab bathrooms, the primary concern is ensuring the membrane bonds well to the concrete and can accommodate any cracking that may develop over time.
Your waterproofing contractor should recommend a specific product system including primer, membrane, and bond-breaker that is suited to your bathroom’s construction and conditions. Using products from the same manufacturer as a system ensures compatibility and maintains warranty coverage. Mixing products from different manufacturers can void warranties and compromise performance.
Get Expert Help with Your Waterproofing Project
Whether you are planning a new build, renovating an existing property, or dealing with a waterproofing issue that needs urgent attention, working with a licensed professional is the best way to ensure a lasting, compliant result. Perth has many experienced waterproofing contractors who understand the local conditions and can deliver the right solution for your specific needs.
Ready to get started? Use our free tool to find a licensed waterproofer in your area and request obligation-free quotes from vetted professionals. We connect you with licensed contractors who specialise in the type of waterproofing your project requires, so you can compare options and make an informed decision with confidence.